I-Bresis Patch, Box of 6-Replacement for Empi Hybresis Wireless Iontophoresis Electrodes

Chattanooga Group introduces the I-Bresis iontophoresis system to replace the Empi Hybresis System. If you have an Empi Hybresis Dose Controller and Charging Station, the I-Bresis electrodes will work on the Empi Hybresis System.

I-Bresis Patch, Box of 6-Replacement for Empi Hybresis Wireless Iontophoresis Electrodes

Click to Enlarge Image

    Close I-Bresis Patch, Box of 6-Replacement for Empi Hybresis Wireless Iontophoresis Electrodes

    Product Code: bresis_5000060

    Price: $65.00

    *This shipping price is an estimate. If you are a business location or do not live in a rural area, actual shipping costs may be less upon checkout.
    *Shipping estimate is for a single unit.

    Product Description

    The I-Bresis hybrid iontophoresis system has the POWER to Deliver optimal drug delivery and flexible, time-saving treatment options. Three treatment modes and the ability to deliver medication with positive or negative polarity, allows clinicians to choose the right medication and right application for each patient.

    The I-Bresis™ Patch is a disposable, single-use Patch with an internal battery and current-limiting circuitry. It can deliver both negatively and positively charged water-soluble drugs/compounds across intact skin. The Patch can be used with and without the Controller. The Controller is used with the Patch to deliver an I-Bresis™ or Standard Treatment. A Patch-Only Treatment does not require the use of the Controller.

    The Patch is and Applied Part that is intended to deliver energy and ions (charged atoms or molecules) across the patient’s skin. The Patch is a prescription device in the USA. The clinician is responsible for selecting the appropriate drug and treatment site for the condition being treated. The Patch is intended to be applied in a clinic or hospital setting by the clinician. I-Bresis™ and Standard Treatments that use the I-Bresis™ Controller are intended to occur in a clinic or hospital setting for the time that the Controller is attached to the Patch. The Patch itself is designed for home use. The Patient may wear the Patch out of the clinic for Patch-Only or I-Bresis™ Treatments. At the discretion of the clinician, Patches may also be sent home with the patient for future treatments.

    Shorter Treatments: The I-Bresis Mode powers a 3 minute Skin Conductivity Enhancement to help break down the skin’s resistance, resulting in a 40-80mA-min treatment in approximately 1-2 hours.

    Convenient: The I-Bresis Patch provides fill-and-go efficiency. Built-in batteries plus dose controller activation allows quick and effective application.

    Applying direct current drives penetration by opening pathways to the skin.1 Compared to passive delivery, the I-Bresis Patches deliver the patient greater benefit form each treatment, ensuring more medication reaches the target tissue.

    Built-in batteries and ergonomic design allow fast application and fill-and-go efficiency. The I-Bresis Patch can be used with or without the dose controller.

    Features

    The I-Bresis™ System is designed to provide the following three treatment options:
    • I-Bresis™ Treatment The Controller delivers current at 3 mA to the Patch for three minutes for a Skin Conductivity Enhancement (SCE), followed by the patient wearing the Patch for approximately one to two hours, resulting in a 40-80 mA-minute treatment respectively.
    • Standard Treatment The Controller delivers current at 2, 3 or 4 mA to the Patch for 10-20 minutes, resulting in a 40 mA-minute treatment. For an 80 mA-minute treatment, repeat the treatment.
    • Patch-Only Treatment The Patch delivers low level current over 2–4 hours, resulting in an approximate 40–80 mA-minute treatment respectively

    Specifications

  • Classifications: Internally Powered. Type BF Applied Part
  • Battery: Contains two 3-Volt non-rechargeable lithium manganese dioxide button cell batteries
  • Environmental Conditions: Storage: 15°C - 30°C (59°F- 86°F) DO NOT expose to temperatures above 50°C (122°F)
  • Flammability: Do not use around flammable gasses, liquids or materials
  • Treatment Modes: I-Bresis™, Standard, and Patch Only
  • Dimensions: 13.7 cm L x 6.6 cm W x 1.1cm H (5.4” x 2.6” x 0.4”)
  • Dose range: 0-80 mA-minutes
  • Maximum Voltage: 6.8 V (Patch only)
  • Maximum Current: 3.4 mA (Patch only)
  • Number of uses: The Patch is designed for only one use.
  • Related Products

    Customers Also Bought

    Live Chat Software
    *MARKER* 0